Wood mounting blocks 1953 Panel

[Neverdone]

Does anyone know the thickness of the wood mounting blocks on a 1953 one ton Panel .. They may be very well the same as the 3100, 3600 trucks or Panel , throw me a number
Thanks
Dan

[Deve]

The blocks are 2 1/8". The pads are 1/4" thick. That is from Mar-K Tech. Hope that helpsya!

[Neverdone]

Deve ,
Is 3/4 " total then......... or are the blocks 2" 1/8 thick for a total of 2 and 5/8" thick ??
Thank Dan

[Deve]

2-3/8" total. I envy you. I am nowhere near that stage yet! Check Mar-K's website. http://www.mar-k.com/installation_hints.aspx. Lots of great information there.

[Neverdone]

THANKS .. This may explain why I am missing some clearance up front . Somewhere I thought I was off by 3/4 inch Let me jack er up and see what happens